Oilcrops — Processing in Australia

Australia: Oilcrops — Processing was 1.92 million t in 2013. ◆ Volatile

Latest (2013)
1.92 million t
Change on year
up 0.9%
World rank
31st
of 162 countries
All-time high
1.92 million t
in 2013
All-time low
132,871 t
in 1976
Years of data
53
1961–2013

Oilcrops — Processing in Australia, 1961–2013

0500.0k1.0M1.5M2.0M196119872013

Source: Food and Agriculture Organization of the United Nations. Measured in t.

Analysis

The most recent figure for oilcrops — processing in Australia is 1.92 million t, measured in 2013. That is the highest value across all 53 years on record.

The figure is up 0.9% on the previous year and up 124.0% over ten years.

Over the whole period, oilcrops — processing in Australia peaked at 1.92 million t in 2013 and was at its lowest, 132,871 t, in 1976.

That places Australia 31st out of 162 countries with data for 2013, putting it in the top quarter.

The series is highly variable year to year, so single readings are best treated with caution.

Oilcrops — Processing in Australia, year by year

Annual values for Oilcrops — Processing in Australia, 1961 to 2013.
Year t Change
1961 146,333 t —
1962 159,427 t +8.9%
1963 173,657 t +8.9%
1964 201,366 t +16.0%
1965 172,464 t -14.4%
1966 212,719 t +23.3%
1967 189,851 t -10.8%
1968 212,209 t +11.8%
1969 232,822 t +9.7%
1970 249,266 t +7.1%
1971 252,779 t +1.4%
1972 285,136 t +12.8%
1973 270,040 t -5.3%
1974 301,846 t +11.8%
1975 272,483 t -9.7%
1976 132,871 t -51.2%
1977 233,603 t +75.8%
1978 346,791 t +48.5%
1979 326,794 t -5.8%
1980 278,160 t -14.9%
1981 418,824 t +50.6%
1982 413,906 t -1.2%
1983 357,283 t -13.7%
1984 491,430 t +37.5%
1985 867,111 t +76.4%
1986 606,984 t -30.0%
1987 514,177 t -15.3%
1988 697,958 t +35.7%
1989 624,164 t -10.6%
1990 563,493 t -9.7%
1991 938,609 t +66.6%
1992 892,856 t -4.9%
1993 690,833 t -22.6%
1994 690,915 t +0.0%
1995 706,523 t +2.3%
1996 805,739 t +14.0%
1997 1.15 million t +43.3%
1998 1.15 million t -0.3%
1999 1.25 million t +8.7%
2000 1.07 million t -14.8%
2001 1.01 million t -5.5%
2002 1.07 million t +6.4%
2003 855,018 t -20.3%
2004 876,904 t +2.6%
2005 1.33 million t +51.7%
2006 1.35 million t +1.2%
2007 938,939 t -30.3%
2008 957,464 t +2.0%
2009 1.23 million t +28.7%
2010 1.28 million t +3.9%
2011 1.62 million t +26.5%
2012 1.90 million t +17.3%
2013 1.92 million t +0.9%

Australia compared with similar countries

  • Australia's 1.92 million t is above the median for high income countries, which is 261,647 t, 7.3× the median. (47 countries reporting)
  • Australia's 1.92 million t is above the median for East Asia & Pacific, which is 110,521 t, 17.3× the median. (16 countries reporting)

Averages by decade

DecadeAverage LowestHighest Years
1960s 188,983 t 146,333 t 232,822 t 9
1970s 267,161 t 132,871 t 346,791 t 10
1980s 527,000 t 278,160 t 867,111 t 10
1990s 884,707 t 563,493 t 1.25 million t 10
2000s 1.07 million t 855,018 t 1.35 million t 10
2010s 1.68 million t 1.28 million t 1.92 million t 4

Countries ranked near Australia

  1. 28 Myanmar 2.15 million t compare
  2. 28 Caribbean 296,112 t compare
  3. 29 China, Taiwan Province of 2.12 million t compare
  4. 30 Australia and New Zealand 1.92 million t compare
  5. 32 Egypt 1.88 million t compare
  6. 33 Belgium 1.79 million t compare
  7. 34 Portugal 1.77 million t compare

See the full ranking of 205 places →

More agriculture & rural data for Australia

All data for Australia →

Frequently asked questions

What is oilcrops — processing in Australia?
Oilcrops — processing in Australia was 1.92 million t in 2013, according to Food and Agriculture Organization of the United Nations.
What is the highest oilcrops — processing recorded in Australia?
The highest recorded value was 1.92 million t in 2013.
What is the lowest oilcrops — processing recorded in Australia?
The lowest recorded value was 132,871 t in 1976.
How does Australia rank for oilcrops — processing?
Australia ranks 31st out of 162 countries with data for 2013.
Is oilcrops — processing rising or falling in Australia?
Over the last ten years it is up 124.0%. The long-run trend across the full record is volatile.
Where does this Australia data come from?
The figures come from Food and Agriculture Organization of the United Nations, published as part of Oilcrops — Processing. Statizoid updates them automatically from the source API.

Download this data

CSV · JSON — 53 observations, free to reuse under CC BY-NC-SA 3.0 IGO (FAO).

Share, cite or embed this page

Cite this page

Oilcrops — Processing in Australia. Statizoid, drawing on Food and Agriculture Organization of the United Nations. Retrieved 27 September 2026, from https://agriculture.statizoid.com/stat/oilcrops-processing/australia/

Embed or link this data

Paste this into a page to link back to these figures. The data itself is free to reuse under CC BY-NC-SA 3.0 IGO (FAO); please keep the attribution.

<a href="https://agriculture.statizoid.com/stat/oilcrops-processing/australia/">Oilcrops — Processing in Australia</a> — Statizoid

About this data

Indicator
Oilcrops — Processing
Unit
t
Source
Food and Agriculture Organization of the United Nations
Licence
CC BY-NC-SA 3.0 IGO (FAO)
Coverage
205 places, 9,840 data points, 1961–2013
Last refreshed

Food Balance Sheet presents a comprehensive picture of the pattern of a country's food supply during a specified reference period. The food balance sheet shows for each food item - i.e. each primary commodity and a number of processed commodities potentially available for human consumption - the sources of supply and its utilization. The total quantity of foodstuffs produced in a country added to the total quantity imported and adjusted to any change in stocks that may have occurred since the beginning of the reference period gives the supply available during that period. On the utilization side a distinction is made between the quantities exported, fed to livestock, used for seed, put to manufacture for food use and non-food uses, losses during storage and transportation, and food supplies available for human consumption. The per caput supply of each such food item available for human consumption is then obtained by dividing the respective quantity by the related data on the population actually partaking of it. Data on per caput food supplies are expressed in terms of quantity and - by applying appropriate food composition factors for all primary and processed products - also in terms of caloric value and protein and fat content.