Soft-Fibres, Other — Import Quantity in Mexico
Mexico: Soft-Fibres, Other — Import Quantity was 3 t in 2013. ◆ Volatile
Soft-Fibres, Other — Import Quantity in Mexico, 1961–2013
Source: Food and Agriculture Organization of the United Nations. Measured in t.
Analysis
In 2013, soft-fibres, other — import quantity in Mexico stood at 3 t. That is the lowest value across all 53 years on record.
The figure is down 66.7% on the previous year and down 96.6% over ten years.
Over the whole period, soft-fibres, other — import quantity in Mexico peaked at 2,521 t in 1964 and was at its lowest, 3 t, in 2013.
Mexico ranks 87th of 145 countries on this measure, in the middle of the range.
The series is highly variable year to year, so single readings are best treated with caution.
Averages by decade
| Decade | Average | Lowest | Highest | Years |
|---|---|---|---|---|
| 1960s | 1,898 t | 1,365 t | 2,521 t | 9 |
| 1970s | 301.6 t | 12 t | 1,644 t | 10 |
| 1980s | 45.7 t | 19 t | 89 t | 10 |
| 1990s | 184.8 t | 29 t | 563 t | 10 |
| 2000s | 50.2 t | 4 t | 210 t | 10 |
| 2010s | 8.75 t | 3 t | 15 t | 4 |
Countries ranked near Mexico
- 85 Cameroon 4 t compare
- 85 Venezuela (Bolivarian Republic of) 4 t compare
- 87 Albania 3 t compare
- 87 Bolivia (Plurinational State of) 3 t compare
- 87 North Macedonia 3 t compare
More agriculture & rural data for Mexico
- Agriculture share gdp 3.88 (2025)
- Value added in the agricultural sector as of gdp vs gdp per capita 3.88 (2025)
- Agricultural raw materials exports 0.1% (2025)
- Agricultural raw materials imports 0.7% (2025)
- Rural population 20.0% (2025)
- Rural population growth -0.6% (2025)
- Rural population 26.34 million (2025)
- Agriculture, forestry, and fishing, value added 3.9% (2025)
- Agriculture, forestry, and fishing, value added 71.18 billion current US$ (2025)
- Bananas — Production 2.67 million t (2024)
Frequently asked questions
- What is soft-fibres, other — import quantity in Mexico?
- Soft-fibres, other — import quantity in Mexico was 3 t in 2013, according to Food and Agriculture Organization of the United Nations.
- What is the highest soft-fibres, other — import quantity recorded in Mexico?
- The highest recorded value was 2,521 t in 1964.
- What is the lowest soft-fibres, other — import quantity recorded in Mexico?
- The lowest recorded value was 3 t in 2013.
- How does Mexico rank for soft-fibres, other — import quantity?
- Mexico ranks 87th out of 145 countries with data for 2013.
- Is soft-fibres, other — import quantity rising or falling in Mexico?
- Over the last ten years it is down 96.6%. The long-run trend across the full record is volatile.
- Where does this Mexico data come from?
- The figures come from Food and Agriculture Organization of the United Nations, published as part of Soft-Fibres, Other — Import Quantity. Statizoid updates them automatically from the source API.
Download this data
CSV · JSON — 53 observations, free to reuse under CC BY-NC-SA 3.0 IGO (FAO).
About this data
Food Balance Sheet presents a comprehensive picture of the pattern of a country's food supply during a specified reference period. The food balance sheet shows for each food item - i.e. each primary commodity and a number of processed commodities potentially available for human consumption - the sources of supply and its utilization. The total quantity of foodstuffs produced in a country added to the total quantity imported and adjusted to any change in stocks that may have occurred since the beginning of the reference period gives the supply available during that period. On the utilization side a distinction is made between the quantities exported, fed to livestock, used for seed, put to manufacture for food use and non-food uses, losses during storage and transportation, and food supplies available for human consumption. The per caput supply of each such food item available for human consumption is then obtained by dividing the respective quantity by the related data on the population actually partaking of it. Data on per caput food supplies are expressed in terms of quantity and - by applying appropriate food composition factors for all primary and processed products - also in terms of caloric value and protein and fat content.